For the fracture of iron screws, it is very easy to encounter in practical applications. However, the fracture of stainless steel screws is rarely seen, because the material of the stainless steel wire rod itself is relatively hard, so the general fracture of stainless steel screws rarely occurs. However, under certain circumstances, stainless steel screws will still break:
 

1. Stainless steel material is poor. The stainless steel wire used is not good in itself, contains impurities, and the purity is not enough, resulting in the hardness of stainless steel screws not meeting the requirements.

 

2. There are problems in the production process. There are certain problems in the entire production process, such as deflection and eccentricity, which will reduce the hardness of the finished stainless steel screws.

 

3. The operation of the product is not standardized during use. We used too much force during installation. Generally, you can test the breaking force before using it, and then adjust the torque.

 

However, the reasons for the breakage of stainless steel screws are more than these, and the specific reasons should be analyzed. But from these reasons, we can get a conclusion that a truly qualified stainless steel screw is rarely broken.

 

The choice of the product is very important, for us Unitek, in stainless steel screws, whether it is material selection or process, are strictly controlled, absolutely will not let bad products into the market.